The SW-95 hydraulic ironworker has 95 tons of punching power and 123 tons of shearing and notching power. This is a dual operator machine where both areas can be operated independently at the same time with no loss of power to either work area. Like all Baileigh hydraulic ironworkers this is a true five station machine.
This hydraulic ironworker is constructed from heavy structural plate that is first bolted, then electro-welded in place for rigidity. All motions of the SW-95 operate using pure vertical movements and NO PIVOT, common on most other hydraulic ironworkers. Vertical movement with no linkages is less stressful on the machine, allowing the tooling to last longer by eliminating the harsh snap when punching.
The punching station has a deep 16 in throat and comes standard with 7 sets of punches and a large scaled table. The table can be broken down to accept channel and angle iron. In the punching section it can be outfitted with the optional pipe notching and press brake tooling.
This hydraulic ironworker is outfitted with a hydraulic hold down system at the shearing station for plate, solids, and angle. An optional channel iron shear is available. To compliment the shearing section an automatic back gauge is available to assist with large production runs. Our shearing section does not produce an expensive slug of material waste common with some other brands.
Our hydraulic ironworkers notching section is great for working with solid plate and angle iron. This notching station can be outfitted with the optional vee notcher.
Specifications | |||||
---|---|---|---|---|---|
Imperial | Metric | Imperial | Metric | ||
Punching | Special Tooling | ||||
Punching Pressure | 95 Tons | 85 Tons | Single Vee Press Brake (L x T) | 9.875 x .625 in* | 250 mm x 15 mm* |
Punch Capacity | 1.062 x .875 in | 27 mm x 22 mm | Multi-Vee Press Brake (L x T) | 19.625 x .187 in* | 500 mm x 5 mm* |
(Diameter x Thickness) | 2 x .5 in | 50 mm x 12 mm | Angle Bending* | 4 x .312 in* | 102 mm x 8 mm* |
Throat Depth | 16 | 410 | Pipe Notching | 4.4 in* | 114 mm* |
Max Stroke Length | 3.93 in | 100 mm | Lg.Vee-Notcher (Side x Side x T)* |
5.75 x 5.75 x .375 in * | 145 mm x 145 mm x 10 mm* |
Cycles / Min | 38 @ 15 mm | Vee-Notcher (Side x Side x T)* |
4.1 x 4.1 x .5 in* | 105 mm x 105 mm x 12 mm* | |
Working Height Up to Die | 41.3 in | 1050 mm | Channel Shear | - | - |
Flat Shearing
|
I Beams Shear | - | - | ||
Flat Bar Shearing | 16 x .75 in | 406mm x 20 mm | Notching | ||
(Width x Thickness) | - | - | Rect. Notcher(WxDxT) | 2 x 3.5 x .5 in | 50mm x 90 mm x 12 mm |
Blade Length | 16.125 in | 410 mm | Working Height | 41.3 in | 1050 mm |
Angle Flange Trim | 4 in | 100 mm | Bar Shearing | ||
Working Height | 28.5 in | 726 mm | Round Bar Shear | 1.75 in | 45 mm |
Angle Shearing
|
Square Bar Shear | 1.75 x 1.75 in | 45 mm x 45 mm | ||
At 90° Shearing | 5.125 x 5.125 x .5 in | 130 mm x 130 mm x 12 mm | Working Height | - | - |
Working Height | 40.9 in | 1040 mm | Other | ||
* Optional Tooling - See your Baileigh Rep Based on material tensile strength of 65,000 PSI.Design subject to change without notice | Electric Power (HP) | 10 HP | |||
Net Weight (Apr.) | 6,050 lbs | 2750 kg | |||
Machine Dim. Apr. (L x W x H) |
70.6 x 40.1 x 73.4 in | 1795 mm x 1020 mm x 1865 mm |