Clausing Mechanical Variable Speed Vertical Knee Mills
Standard Features…
- Meehanite Castings for superior rigidity and wear resistance
- Hardened & Ground X,Y & Z Ways
- X/Y ways coated with Turcite B
- Column & Knee Way Covers
- T-slots are ground to provide reference edge for positioning your workpiece
- Hardened & Ground Table Surface
- Hardened & Ground Spindle
- Chromed & Ground Quill
- Chromed X, Y & Z Leadscrews
- Double Nut Leadscrew for backlash compensation
- ABEC 7/CP4 Spindle Bearings
- Coolant System w/Pump & Switch
- Flexible Segmented Coolant Nozzle
- Chromed Y Screw Covers and 0ne-piece Wipers
- 7/16" Imperial Drawbar (2VS, 3VS )
- M16 Metric Drawbar w/lSO 40 Spindle (4VSQ)
- 3 hp AC Motor (2VS & 3VS)
- 5 hp AC Motor (4VSQ)
- AC Rapid Vertical Drive (4VSQ)
- Variable Speed Drive
- Articulating Head for Compound Angles
- Worm gear angular positioning of head in two directions
- Lever-operated manual rapid quill movement
- Handwheel for fine quill feed
- Adjustable automatic feed disengagement for quill feed
- Micrometer depth stop
- Reversing switch for clockwise or counter clockwise operation
- R-8 or lSO 30 Spindle (2VS & 3VS)
- ISO 40 Spindle (4VSQ)
- Spindle Brake (Hand operated)
- One-shot lubrication
- Halogen Work Light
- Tool Kit, Test and Accuracy Chart
- Operations Manual/Parts List
- Knee Assist on (4VSQ)
Models |
3VS |
|
|
Table Size |
10" x 54" (254x11370mm) |
|
No. of T-Slots |
3 |
|
T-Slot Width |
5/8" (16mm) |
|
T-Slot Center Distance |
2.48" (63mm) |
|
Table Ways |
Dovetail |
|
Knee Ways |
Square |
|
Column Ways |
Dovetail |
|
X Longitudinal |
36" (915mm) |
|
Y Cross |
15.74" (400mm) |
|
Knee |
17.4" (450mm) |
|
Ram |
20.5" (520mm) |
|
Spindle Motor |
3 hp |
|
Amp. Draw 208v. |
10 |
|
Amp. Draw 230v. |
10 |
|
Amp. Draw 460v. |
5 |
|
Variable Spindle Speed rpm |
60-4300 |
|
Low Range rpm |
60-500 |
|
High Range rpm |
550-4300 |
|
Main Spindle Taper |
R-8 or ISO 30 |
|
Spindle Travel |
5" (127mm) |
|
Quill Feed - in/rev. (mm/rev) |
.0015/.0031/.006 (.004/.008/.015mm) |
|
Quill Diameter |
3.38" (85mm) |
|
Column Turret Diameter |
16.33" (415mm) |
|
Knee Width |
14.17" (360mm) |
|
Column Bearing Length |
18.11" (460mm) |
|
Saddle/Table Bearing Length |
20.47" (520mm) |
|
Ram/Turret Bearing Length |
17.51" (445mm) |
|
Ram Length |
32.75" (832mm) |
|
Table Load |
880 Ibs. (400kg) |
|
Net Weight |
2,866 Ibs. (1300kg) |