Sheet Metal Roll
The PR-603-4 sheet metal roll has a maximum 6' forming width, which can roll up to 3 gauge mild sheet steel. This machine is completely hydraulically driven for increased durability and reliability. For your safety we have included an emergency stop cable that is located around the perimeter of the machine. The top roll has a very simple release mechanism to release work that has been wrapped around the top roll.
- 1 Driven Roll
- Hydraulically Driven
- 1.5 - 6 Meters Per Minute
- 7 ½" Top Roll Diameter
- Push Button Coning Adjustment
- Digital Programmer for Repeatable Bends
- Digital Readout
- Operator controlled via remote console
- Service requirement is 220 Volt, 3 Phase, 60 Hertz
- 7700 lbs.
Specifications |
|
Model |
PR-603-4 |
Forming Width |
72 in |
Capacity Mild Steel |
.250 in |
Upper Roll Diameter |
7.5 in |
Side Roll Diameter |
5.90 in |
Minimum Forming Diameter |
11.25 in |
Roll Adjustment Pinch |
Hydraulic |
Roll Adjustment Back |
Hydraulic |
Digital Position Readout |
Yes |
Roll Speed |
1.5 - 6 rpm |
Driven Rolls |
1 |
Motor |
7 hp |
Power Requirement |
220v / 3 phase |
Shipping Dimensions (L/W/H) |
138 in / 43 in / 51 in |
Shipping Weight |
7700 lbs |