The CS-250-EU is a manually operated 10” circular cold saw that is well constructed for medium grade production seen in most small fabrication shops. This machine has a steel stand that houses the cold saw base that is constructed of cast iron. The cast iron machine is very rigid when cutting at maximum capacity, this extends blade live and decreases cycle times.
Like all EU series of cold saws, this one only requires 110 volts of power so it can run in almost any fabrication shop imaginable. Also perfect for going to remote job sites. The CS-250-EU can miter cut 45 degrees left or right making it a good choice for cutting angle iron, tubing, or channel. It has a taper lock adjustment on the vise for quick changes of material, and has support for both sides of the cut to extend blade life. A stop rod is standard for repeatable cuts every time.
The CS-250-EU circular cold saw comes standard with proper guarding, a 250mm blade, and a coolant system for cooling the blade and washing away chips. This is a manual machine which means the operator loads the machine, clamps the material, and engages the machine by pressing a trigger switch while feeding the blade through the material.
Specifications
MODEL
CS-250EU
Maximum Blade Diameter (inches)
10" (250mm)
Arbor Size
32 mm
Blade Speed
54 RPM
Operation
Manual
Head Style
Pivot
Maximum Vise Opening
4" (100mm)
Vise Style
Single Action with Cam Lock
Head Miter
45º Left / 45º Right
Slotting Capable
No
Coolant System
Yes
Motor
1 HP
Electrical Requirements
110 Volt 60 Hz
Shipping Dimensions (L/W/H)
60" / 44" / 48"
Shipping Weight
375 lbs
Cutting Capacity - Model: CS-250EU | ||
---|---|---|
Head Swivel | 90 degree | 45 degree |
3in | 3in | |
1.2in | 1.2in | |
2.5in x 2.5in | 2.2in x 2.2in | |
2.4in x 2in | 2.4in x 2in |