OCEAN FREIGHT SURCHARGE OF $1500 IS IN EFFECT
· 3.125” Spindle Through Hole; 7.5 HP Spindle Motor
· Solid Full Length Casting Base with Front Loading Chip Tray for Easier Cleaning
· Adjustable Over-load Feed Clutches
· Quick Reversal Feed from Apron
· Full-length Safety Foot Brake; Spindle Jog Button Control
· One-shot Lubrication for Apron, Carriage, and Bed Ways
· Multi-position Adjustable Feed Position Stops
· Dual Inch/Metric Calibrated Tailstock Quill with Knockout Tang; Heavy Duty Two Speed Tailstock
· Dual Inch/Metric Dials with Quick-change Sleeve
· Interlocked Breaker Switch on Electrical Cabinet
GENERAL SPECIFICATIONS
Capacity |
Swing over bed ways |
17” (435mm) |
Swing over cross slide |
10.875” (277mm) |
|
Swing over gap |
24.5” (622mm) |
|
Gap length (w/ face plate) |
8” (200mm) |
|
Bed width |
12” (305mm) |
|
Distance between centers |
44” (1120mm) |
|
Headstock |
Spindle hole |
3.125” (80mm) |
Spindle nose camlock |
D1-6 |
|
Spindle to sleeve taper |
85mm 1/19.18 – MT#5 |
|
Spindle speed |
12 Steps, 36 – 1800 RPM |
|
Spindle speed ranges |
N/A |
|
Carriage |
Bearing length on ways |
17.3” (440mm) |
Cross slide width |
7.25” (185mm) |
|
Cross slide travel |
10.6” (270mm) |
|
Top slide (compound) travel |
4.75” (120mm) |
|
Feed Box |
Thread capacity (inches) |
45, 2 - 72 TPI |
Thread capacity (metric) |
39, 0.2 - 14 MM |
|
Modular threads range |
18, 0.3 - 3.5 M |
|
Diametral pitch range |
21, 8 – 44 DP |
|
Longitudinal feeds |
0.0015 – 0.04 IPR |
|
Cross feeds |
0.00075 – 0.02 IPR |
|
Tailstock |
Quill diameter with tang |
2.3” (59mm) |
Quill travel |
5” (130mm) |
|
Quill taper |
MT#4 |
|
Power |
Main motor |
7.5 HP |
Coolant pump motor |
1/8 HP |
|
Control circuit voltage |
115 V |
|
Dimension |
Shipping dimension |
95”x39”x63” |
Weight |
Net weight (approx) |
3850 LBS |
Gross weight (approx) |
4510 LBS |