STANDARD EQUIPMENT:
¨ Front & Rear Rubber Way Covers
¨ One shot Lubrication System
¨ Manual Drawbar
¨ Wired 220V or 440V. Please specify
¨ Tool Kit:
Machine Manual, Half-Nut Wrench, Wrench 17m, 19m, Set of 6 Allen Wrenches, Philip Screw Driver, Flat Head, Screw Driver, Oil Can, Grease Gun, Rear Way Cover Bracket, Pin For Indicator, and Can of Paint.
¨ 10” x 54” Table
¨ 16.3” x 39” x 15.3” Travel
¨ Hardened & Ground Boxways on Saddle & Column
¨ Vari-Speed Drive
¨ 5HP Motor
¨ #40 Spindle Taper
¨ Dual Cooling Fans
¨ Meehanite Casting
¨ ABEC-7 Super Precision Spindle Bearings
¨ Turcite - B Coating (X, Y)
¨ Cross Way Cover
¨ Self-Lubricating Motor Shaft extends Pulley Life
ü Table
¨ Working Surface 54” x 10”
¨ T-Slots Number and Size 3 Slots, 5/8”
¨ 26” Wide Saddle
ü Capacity
¨ Travels (X & Y) 39”x 16.3”
¨ Quill Travel 5”
¨ Ram Travel 18.5”
¨ Knee Travel 15.3”
¨ Throat Distance 9.8” to 28.3”
¨ Spindle Gageline to Table Top 5.375”-16.9”
ü Spindle
¨ Spindle Motor 5 HP
¨ Wiring Voltage 220V/440V
¨ Spindle Nose Taper NST 40
¨ Spindle Variable Speed Drive 60-4,500 Rpm
¨ Quill Feed 3 Speed (IPR) .0015, .003, .005
¨ Accuracy 0.0002” TIR
¨ Head Tilt (Rt. To Left) 90°
¨ Head Tilt (Up And Down) 45°
ü Dimensions and Weight
¨ Floor Area (W x D x H)
¨ Weight 3,300 Lbs.
Specifications may be changed or improved without notice.
ü Total Power Consumptions
¨ 220V 5KVA/15 amps
¨ 440V 5KVA/7.5 amps