The Oliver 4470 25” Planer puts other planers to shame. With two full feet of cutting width, over 9” of cutting capacity, and the ability to take up to 1/4” off in a single pass, this planer will take whatever you can dish out. The Digital Thickness Controller and Powered Table Travel eliminate guesswork, make dialing in settings a breeze. But ease of operation isn’t everything, this Oliver outputs stock that’s true and straight. A Sectional Infeed Roller and Chip Breaker apply uniform pressure on uneven stock, coupled with a Driven Outfeed Roller to keep your stock in place. Add a powerful 10HP motor, and you’ve got a planer that’s ready to tackle anything!
FEATURES
· Four Knife Cutterhead or Byrd Helical Available
· Three Feed Speeds: 20, 25, and 30 FPM
· Powerful 10HP or 15HP Motor
· Segmented Infeed Roller and Sectional Chip Breaker
· Two Driven Outfeed Rollers
· Digital Thickness Controller and Up/Down Powered Table Travel
SPECIFICATIONS |
|
Model No. |
4470 |
Stock No. (10HP, 1Ph) |
4470.001 - Straight |
Stock No. (15, 3Ph) |
4470.002 - Straight |
Stock No. (10HP, 1Ph) |
4470.101B - Byrd Helical |
Stock No. (15, 3Ph) |
4470.102B - Byrd Helical |
Maximum Stock Width (in.) |
24 |
Maximum Stock Thickness (in.) |
9-1/4 |
Minimum Stock Thickness (in.) |
1/25 |
Minimum Stock Length (in.) |
10 |
Dust Port Diameter (in.) |
5 |
Minimum CFM Required |
900 |
Segmented Infeed Roller Diameter (in.) |
3 |
Two Steel Outfeed Roller Diameter (in.) |
3 |
Feed Speeds (FPM) |
20, 25 and 30 |
Bed Rollers |
2, Adjustable |
Table Size (L x W/in.) |
32 x 26 |
Cutterhead Diameter (in.) |
3-1/2 |
Number of Knives (straight) |
4 |
Number of Knives (helical) |
125 |
Cutterhead Speed (RPM) |
4,800 |
Table Support |
2-Column |
Motor |
10HP, 1Ph, 220V Only |
|
15HP, 3Ph, 220V/440V, Prewired 220V |
Shipping Dimensions (L/W/H) |
53"x34"x59" |
Gross Weight (lbs.) |
1,837 |