NEW EQUIPMENT
MANUFACTURERS
Sharp LMV/MP-2 G-2 LMV 9x 42 Mill with Acu-Rite Millpower CNC 2
Manufactures Model Number:
LMV/MP-2 G2
$ 37,995.00
STANDARD FEATURES | |
• | ISO 9002 certified quality to industry standards |
• | Highest grade Meehanite® casting |
• | A pair of precision ABEC-7 angular contact bearings to support spindle |
• | The spindle is ground and chromed to fit the housing to insure runout of 0.0002" T.I.R. |
• |
Motor shaft and variable speed drive pulleys are dynamically balanced, then chromed for flawless fit, ground ribs on inside diameter, for smooth speed changes |
• | Motor shaft has an oil channel in the center that is fed by grease fitting on the lower end, to keep variable speed drive pulley moving smoothing on the shaft |
• | Use a roller bearing for lower support of the shaft to ensure proper loading, support and alignment to prevent the shaft from being distorted by the tension of the belt, for quite, accurate operation at any speed |
• | High out-put double fans keep head and motor cool, to run jobs for extended periods without damaging the motor, belts and bearings |
• | Patented knuckle design uses 6 bolts, 3 bolts per side, securing them from the outside, it locks the head securely for better accuracy and performance |
• | High precision hardened and ground ballscrews on X and Y-axes |
• | The dovetail ways are hard chromed on saddle and column |
• | Hand scraped saddle and knee for better oil retention to avoid chips and dirt embed in the knee and damage the sliding surface |
• | All wear areas are oil grooved for maximum lubrication |
• | Automatic lubrication system equipped |
• | Model LMV/MP3 as shown |
|
|
• | Made in the U.S.A. |
• | ACU-RITE® MILLPWR 2-axes control/3-axes digital readout system |
• | Full-color 10" flat panel LCD display with 3-D tactile-feel color keypad |
• | Power AC brushless servo motors |
• | Easy to use, menu prompted, conversational format programming |
• | Translate DXF files directly into program code |
• | Built-in alphanumeric engraving on line or arc |
• | Direct closed loop feedback using precision linear glass scales with absolute encoder Position-Trac technology |
• | 3-1/2" Floppy disk drive and RS-232 with remote storage capability |
• | Runs G-code files from CAD/CAM programs for full 3-D contouring capability |
• | Remote stop/go switch |
• | Emergency table stop button |
• | Immediate part-view graphics |
SPECIFICATIONS |
|
Table Size (in.) |
9 x 42 |
Spindle Taper |
R-8 |
Number of Spindle Speeds |
Variable |
Range of Spindle Speeds (RPM) |
60 - 4,500 |
Downfeeds of Spindle (per/rev./in.) |
0.0015, 0.003, 0.006 |
Head Swivel | 360o |
Head Tilt (L & R) | 45o |
Head Tilt (U & D) | 45o |
Distance Spindle Nose to Table (min./in.) | 2-1/8 |
Distance Spindle Nose to Table (max./in.) | 18 |
Distance Spindle to Column (min./in.) |
6-3/4 |
Distance Spindle to Column (max./in.) |
18-1/2 |
Spindle Travel (in.) |
5 |
Table Travel (in. - X-axis) | 25 |
Saddle Travel (in. - Y-axis) | 11 |
Knee Travel (in. - Z-axis) | 16 |
Ram Travel (in.) | 12 |
T-slot Number & Size (in.) | 3 and 5/8 |
Motor | 3 HP, 220V/440V/3 Phase/60 Hz., Prewired 220V |
Machine Weight (lbs.) | 3,200 |
Machine Dimensions (in./W x D x H) | 84 x 77 x 81 |
STANDARD EQUIPMENT | |
• | Automatic Lubrication System |
• | Front and Rear Rubber Way Covers |
• | Draw Bar |
• | Tool Kit |
OPTIONAL EQUIPMENT - Please call for more detail information |
|
• | Air Power Draw Bar |
• | Knee Power Feed - Z-axis |
• | 4" Riser Block |
• | 7" Riser Block |
• | Halogen Work Light |
• | Coolant System with Chip Pan |
• | Right Angle Milling Attachment with Arbor |
• | Horizontal/Vertical Rotary Table |
• | Milling Machine Vise with Swivel Base |
• | R-8 Collet Set |
• | Clamping Kit |
CONTROL SYSTEM OPTIONAL ACCESSORIES - Please call for more detail information |
|
• | Automatic Spindle Control |
• | Electronic Edge Finder |
• | Linear Glass Scale on Knee Axis for Coupled Knee Position Feedback |
• | AMI - Programmable Spindle and M-Function Outputs |
Home |
Company Info |
Quick Quote |
Lease Financing |
Shipping / Freight |
Contact Us |
Terms |
Call Toll Free: 866.532.2962