NEW EQUIPMENT
MANUFACTURERS
SHARP 1440F GEARED HEAD GAP BED ENGINE LATHE
Manufactures Model Number:
1440F
$ 15,499.00
STANDARD FEATURES | |
• | Forge steel spindle supported by two high precision tapered roller bearings to ensure precise, reliable turning at any speed |
• | Heavy duty D1-4 camlock spindle nose |
• | Hardened and ground headstock gears and shafts are lubricated in oil bath |
• | Induction hardened and ground bedways for rigid structure |
• | 8.13" Extra wide bedways with a larger apron, compound and a generous 13-1/2" cross slide allows heavier cutting with less vibration |
• | Removable gap for large diameter applications |
• | Carriage equipped with overload clutch to protect gears and leadscrews |
• | Totally enclosed gearbox design use levers to set different threads and feeds |
• | Inch and metric dual dials with direct readings for cross and compound feeds |
• | Thread and feed chart for inch and metric |
• | Directional control of carriage feed at side of apron for easy operation |
• | Centralized push button controls with emergency stop and spindle jog |
• | Heavy casting iron base to ensure rigid and stable operation for the life of the machine |
• | Tailstock has tang slot and inch/metric graduations on quill |
• | Electrically activated foot brake for quick stopping action |
• | Frontal removal chip and coolant tray |
• | Full length splash guard |
• | Dual voltage electrics for 220V/440V/3 phase/60 Hz, please specify when ordering |
Swing over Bed (in.) |
14 |
Swing over Cross Slide (in.) |
8-5/8 |
Swing over Gap (in.) |
20 |
Distance between Centers (in.) |
40 |
Bed Length (in.) | 66 |
Bed Width (in.) | 8.13 |
Spindle Bore (in.) |
1-1/2 |
Spindle Nose, Camlock | D1-4 |
Number of Spindle Speeds |
16 |
Range of Spindle Speeds (RPM) |
45 - 1800 |
Spindle Bore Taper |
MT-5 |
Cross Slide Travel (in.) | 7 |
Cross Slide Width (in.) | 6-3/4 |
Compound Slide Travel (in.) | 4 |
Compound Size (in./L x W) | 8-1/2 x 3-1/2 |
Saddle Width (in.) | 13-1/4 |
Apron Width (in.) | 11 |
Number of Longitudinal Feeds | 40 |
Range of Longitudinal Feeds (in./rev.) | 0.0012 - 0.0294 |
Number of Cross Feeds | 40 |
Range of Cross Feeds (in./rev.) | 0.0003 - 0.01 |
Number of lnch Threads | 40 |
Range of Inch Threads (T.P.I.) | 4 - 112 |
Number of Metric Threads | 22 |
Range of Metric Threads (mm) | 0.45 - 7.5 |
Leadscrew Size (in. x T.P.I.) | 7/8 x 8 |
Tailstock Quill Diameter (in.) | 1-3/4 |
Tailstock Quill Taper | MT-3 |
Tailstock Quill Travel (in.) | 4-1/2 |
Main Motor, Pre-wired |
3 HP, |
Machine Weight (lbs.) |
1,650 |
Machine Dimensions (in./L x W x H) | 75.50 x 29 x 47 |
STANDARD ACCESSORIES | |
• | 1/4" - 3-3/4" Steady Rest with Brass Jaws |
• | 6" Back Plate |
• | 4-Way Tool Post |
• | Thread Dial |
• | Center Sleeve |
• | MT-3 Dead Centers |
• | Coolant System |
• | Full Length Splash Guard |
• |
Service Tools 8" 3 Jaw Chuck now included |
OPTIONAL ACCESSORIES- Please call for more detail information |
• | 6" Universal 3-Jaw Chuck |
• | 8" Universal 3-Jaw Chuck |
• | 8" Independent 4-Jaw Chuck |
• | Follow Rest |
• | 12" Face Plate |
• | American Tool Post |
• | Micrometer Carriage Stop |
• | 4-Way Carriage Stop |
• | Chuck Safety Guard with Limit Switch |
• | Halogen Work Light |
• | MT-3 Live Center |
• | Tool Post Grinder |
• | Quick Change Tool Post and Holders Set |
• | 5C Lever Type Collet Closer with Installation |
• | Taper Turning Attachment with Installation |
• | Digital Readout System with Installation |
Home |
Company Info |
Quick Quote |
Lease Financing |
Shipping / Freight |
Contact Us |
Terms |
Call Toll Free: 866.532.2962