NEW EQUIPMENT
MANUFACTURERS
The new model JWS-25X Shaper features a powerful 3HP motor with magnetic controls. The large 25”x 25-1/2” precision ground cast iron table provides plenty of support. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independently adjustable left and right fence has a built in 4” dust port.
Features and Benefits
• Two-speeds let you select the best speed and torque for different cutter diameters
•Independently adjustable left and right fences, standard with a micro adjust control for precise
positioning
• Large 25” X 25-1/2” precision ground cast iron table provides a durable work area
• V-belt transfers maximum power to the spindle
• Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs
Part Number | 708309 |
Spindle Speed | 7500 and 10,000 RPM |
Reversable | Yes |
Spindle Diameter | 1/2 and 3/4 " |
Spindle Size Under Nut | 1/2 (2 13/64) and 3/4 (3 3/16) " |
Spindle Travel | 3 1/2 |
Tilting Spindle | n.a. |
Table Size | 25 x 25 1/2 " |
Table Height From Floor | 33 " |
Table T-Slot | 3/4 x 3/8 " |
Table Opening Diameter | 6 9/32 " |
Table Insert Opening Diameter | 2 9/16 and 4 21/64 " |
Fence Size (L x H) | 14 1/2 x 4 3/4 " |
Fence Travel (Major and Minor) | 4 1/4 and 15/16 " |
Table Inserts | 2 |
Maximum Diameter Cutter Below Table | 6 " |
Maximum Diameter Cutter Above Table | 7 " |
Router Bit Collet Diameter | 1/4 and 1/2 " (optional) |
Dust Port Outside Diameter | 4 " |
Dust Collection Minimum CFM Required | 350 cu.ft/min |
Electrical Controls - Magnetic Starter | Yes |
Digital Readouts | n.a. |
Motor Power | 3 HP |
Motor Voltage | 230 V |
Prewired Voltage | 230 V |
Motor Current | 16 A |
Motor Phase | 1 Ph |
Model Number | JWS-25X |
Brand | Jet |
Height | 23 inch |
Width | 25 inch |
Length | 43 inch |
Net Weight | 331 pound |
WARRANTY AND SERVICE WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848. |
Home |
Company Info |
Quick Quote |
Lease Financing |
Shipping / Freight |
Contact Us |
Terms |
Call Toll Free: 866.532.2962